FM Approvals 1319 Centrifugal Fire Pumps (Horizontal, End Suction Type)

离心式消防泵（卧式、端吸式）

基本信息

标准号

FM Approvals 1319

标准状态

历史

发布单位或类别

美国-FM认证(US-FMA);

发布日期

实施日期

废止日期

CCS分类

ICS分类

研制信息

起草单位

- 展开▼

起草人

归口单位

摘要

FM Approvals 1319 encompasses the design and performance requirements for horizontal, end suction type, centrifugal fire pumps for use in fire protection systems. Approval is limited to horizontal, end suction type, centrifugal pumps which have a rated pressure of at least 40 psi (275 kPa). In cases where metric sized horizontal, end suction type, centrifugal fire pumps are to be examined for Approval, test criteria comparable to the United States equivalent size shall be used. This standard encompasses the requirements for single and multistage end suction fire pumps. FM认证1319涵盖了消防系统中使用的水平、端吸式离心消防泵的设计和性能要求。认证仅限于额定压力至少为40 psi（275 kPa）的水平端吸式离心泵。如果需要检查公制尺寸的水平端吸式离心消防泵以获得批准，则应使用与美国同等尺寸的试验标准。本标准包括单级和多级端吸消防泵的要求。展开▼

关联标准

代替如下标准

1.FM Approvals 1319(October 2008) 。

被如下标准代替

1.FM Approvals 1319:2020(December 2020) 。

相似标准

1.Fire-fighting pumps - Fire-fighting centrifugal pumps - Requirements for the suction-sided and pressure-sided assembly, test after installation in the fire-fighting vehicle
机译：消防泵.消防离心泵.消防车安装后的吸入侧和压力侧总成试验要求
2.Centrifugal Fire Pumps (Horizontal, Split-Case Type)
机译：离心式消防泵（卧式、分体式）
3.Electronic Entry Data Sheet for Application of ASME B73.1M - 1991 Specification for Horizontal End Suction Centrifugal Pumps for Chemical Process Technical Correction
机译：ASME B73应用的电子输入数据表 1M-1991化工过程用卧式端吸离心泵规范[技术修正]
4.Application of ASME B73.1M - 1991 Specification for Horizontal End Suction Centrifugal Pumps for Chemical Process
机译：ASME B73的应用 1M-1991化工过程用卧式端吸离心泵规范
5.Thermoplastic and Thermoset Polymer Material Horizontal End Suction Centrifugal Pumps for Chemical Process
机译：化工用热塑性和热固性聚合物材料水平端吸离心泵